Test Plugs Ltd

Incorporating Suffolk Gauges

12 Falklands Road, Boyton Hall Estate
Haverhill, Suffolk, CB9 0EA, England
UK Tel: 01440 704 201 or 763 167
UK Fax: 01440 763 121
Email: sales@test-plugs.com

Test Plugs
Home Up Test Plugs for AHUs Gauges Test Plugs Thermometers

 

Home
Up
Advantages
Installing
Schematic
Test Plug Accessories


Quality approved to
BS EN 9001:2000
Registration Number FM10884
Top Row: 8mm (1/4")BSPT Test Plugs in Brass and 316 Stainless Steel. Types EP8 and EP8SS

Middle Row: 15mm (1/2") BSPT Test Plugs in Brass and 316 Stainless Steel. Types EP15 and EP15SS

Bottom Row: Extended 8mm (1/4") BSPT and 15mm (1/2") BSPT in Brass and 316 Stainless Steel.
(With an extra 38mm (1 1/2") in length for insulation)
(Eliminates extra piece and additional fitting time).
Types EP8EX, EP8EXSS, EP15EX and EP15EXSS

Small Page1.jpg (38758 bytes)

 

Advantages Of Rubber Sealing Test Plugs

Standard Construction Types EP8 EP8EX EP15 EP15EX.
Body, cap and retaining ring: Brass.
Cap seal: Neoprene Rubber.
Retaining strap: Ethylene Propylene Rubber.
Core: Ethylene Propylene Rubber.
Max. Pressure: 35 BAR, 500 PSI.
Temp range: -8°C (18°F) up to +135°C (275°F).
Suitable for low temperature hot water, chilled water and low temperature steam. (Not suitable for oil or other  hydro-carbon fluids). See Neoprene below.
"NEOPRENE CORE" Types N8 and N8 EX, N15 and N15 EX. Suitable For Some Oils And Gases.
Max. Pressure: 35 BAR, 500 PSI.
Temp range: -18°C (0°F) up to +93ºC(200ºF).
Stainless Steel plug models are EP8SS, N8SS, EP8EXSS, N8EXSS, EP15SS, N15SS, EP15EXSS & N15EXSS.

NB.

Specifications may be changed without notice.
‘Neoprene’ is a registered trade name of Dupont Limited.

  cut-away.jpg (28168 bytes)

Please follow this link for a Typical Pipework Schematic